MC-4带有4英寸的入口端，提供必须的容量来快速装载和卸货。因此泵入口通过端盖，减小泵匮乏。要想利用这个独特的特征，泵必须逆时针旋转，以轴指向观察者。同样地看到从右边端口释放，泵是不可逆的，旁通阀和过滤器是另外的装备。史密斯泵MC-4可用于50和25周期的马达。在1500RPM时具有相同性能如上所示。
The Model MC-4 pump,with 4-inch inlet port,provides the necessary capacity for fast loading and unloading.Since the pump inlet is through the end cover,pump starvation is minimized.To take advantage of this exclusive feature,the pump must turn counter-clockwise,as viewed with shaft pointing toward observer.The discharge like-wise must be taken from the right side port,similarly viewed.Pump is not reversible.Bypass valve and strainer are extra equipment.Model MC-4H is available for use with 50 and 25 cycle motors.At 1500 RPM has same capacities as shown above.
PUMP SELECTION
|
PUMP ONLY
|
AVERAGE DELIVERY RATE IN GPM
|
MAXIMUM DIFFERENTAIL PRESSURE
|
INLET/OUTLET SIZE:FEMALE THREADED
|
MOTOR
|
PUMP ROTATION AS LOOKING AT PUMP SHAFT-END
|
|
MODEL
|
40PSID,1800RM
75PSID,1800RM
|
PSI
|
INCHES
|
H.P.
|
|
|
MC-4
|
125
105
|
125
|
4"INLET
2.5"OUTLET
|
7.5H.P.TO40PSID
10H.P.OVER75PSID
|
CCW
|
当前位置：首页 -> 商业机会 ->
供应信息
