CT50-PB型自动包装机
一、 适应范围
本包装机适用于化工、建筑材料、非金属矿、钢铁、环保等行业中流动性一般或较差的粉体物料的自动定量灌装。如：颜料、染料、铁粉、水泥、粉煤灰、干粉砂浆、氧化锑、滑石粉、碳酸钙等。
二、 基本原理
该机采用国际先进粉体包装技术，由变频电机拖动螺旋给料器往阀口包装袋中进行送料，通过调整给料器的加料速度来实现包装速度和精度的控制。主要由传动装置、计量称重系统、传动箱总成、电气控制系统、气动控制与执行系统、机体等组成。
三、 技术参数
包装能力： 120～360包/小时
计量范围： 20～50公斤/包
准确度： ≤±0.5％
气源压力： 0.5MPa
耗气量： 0.01m3/sec
电源电压： 380VAC, 50HZ
总功率： 6KW
包装袋规格：各类阀口袋包装袋
四、 技术特点
1．采用国际先进粉体包装技术，由国际顶级品牌调速器调节控制，给料速度可实现无级调整控制。
2．灌装称重为杠杆式自动计量皮重式，具有自动夹袋，自动脱袋功能，安装操作极其简便。
3．包装机工作过程采用可编程控制器（PLC）程序控制，电气控制柜为独立防尘结构。
4．按环保理念设计，设有专用除尘接口，确保优良工作环境。
5．工作时只需人工套袋，其他程序全部自动完成，运行可靠。
CT50 - PB Automatic Packing Machine
1.Application
This packing machine is applicable for automatic quantificational filling of powdery materials with general or worse fluidity, in such sectors as chemicals, building materials, non-metal mines, steel and iron, environment protection. The above materials cover pigment, dyes, ferrous powder, cement, fly ash, dried mortar powder, antimony oxide, talc powder and calcium carbonate.
2. Basic Principle
Adopting updated international technique of power packing, it conducts feeding into valve-like sack by driving the screw feeder with frequency-conversion motor. Packing speed and accuracy can be ensured through adjusting the loading speed of the feeder. It mainly consists of gearing, measuring/weighing system, transmission assembly, electric control system, pneumatic control and actuating system, main frame.
3. Technical Parameters:
Packing Capacity:120～360 sacks/h
Measuring Scope:20～50 kg/sack
Accuracy:≤±0.2%
Compressed Air Source Pressure:5-8Bar
Air Consumption:0.01 m3/sec
Supply Voltage: 380VAC,50HZ
Total Power:6KW
Specifications on Container Sack: Various container sacks with valve-like opening.
4. Technical Characteristics:
Adopting updated global technique of power packing, it is controlled by the speed-regulator of world top brand, and stepless speed control is available for its feeding speed.
Filling weighing means an automatic lever-type tare-measuring mode, with function of auto sack-clamping, auto sack-releasing, extremely simple and easy both for installation and operation.
PLC can be adopted during the working process of packing machine. Independent dustproof structure is used for the electric control cabinet.
With environment-friendly designing concept, it has the special interface for dust-removing to ensure a pleasant working environment.
Only manual sack-fitting is required during working. Other procedures will be automatically fulfilled with reliable operation.
|
